+86-17895376160

24/7 Customer Support

bruce@aluminaceramicball.com

Reply within 12 hours

Mon - Fri: 9:00 - 17:30 (GMT+8)

Online store always open

Defluorinated activated alumina ball

1. Activated alumina ball defluorinator

The defluorinated activated alumina ball is a kind of activated alumina ball. The appearance is white spherical particles, with porosity, large surface area, high water absorption, fluorine removal capacity, high mechanical strength, good physical properties, and strong moisture absorption It is a non-toxic, odorless, insoluble in water and ethanol, and is a solid material that has strong fluorine adsorption.

2. The use of alumina balls

Mainly used for fluoride removal in drinking water or in other industrial installations. It is completely reliable in use, easy to regenerate, and has a long service life. The water purified by this fluorine removal agent can meet the national drinking water hygiene standards and has a fluoride removal effect. Obviously, it can be used as a fluoride removal agent in drinking water or other industrial installations. It can also be used as catalyst, catalyst carrier, desiccant, adsorbent, color and odor elimination agent of industrial sewage, etc.

3. How to use alumina ball

Activated alumina fluoride removal agent can be used in conjunction with household fluoride removal cylinders, and can also be used in combination with fluoride removal devices in water plants or industrial fluoride removal devices. It is simple to operate and convenient to use. Activated alumina fluoride removal agent has a long use time, good effect, and economical benefits. It can be used continuously for 6-8 years. When the fluoride removal effect is significantly reduced, it only needs to be soaked and rinsed with aluminum sulfate solution for subsequent use.

4. Regeneration method of alumina ball

The aluminum sulfate solution is the same as the activation solution. Put the regenerated alumina defluorinator into the above solution and soak for 30 hours, discard the soaking solution (stir properly when soaking), and then wash with water for 3-5 times, each time Use about 2 liters of water. Or use the PH adjustment method to regenerate the PH and control it at 7.5. The regeneration principle of activated alumina ball defluorinator for water plants and industrial use is also the same.

You May Also Enjoy these Article for alumina product

Why inert alumina balls can’t be reused

After three years of use, we want to replace it, and then can it be used again? If it can’t be used, why? 1. If the catalyst is replaced after three years of trial use, we recommend that the inert ceramic balls be replaced at the same time, especially in

Alumina ball detection method

Alumina ball detection method Diameter size detection and measurement: use a vernier caliper to measure the average value from different angles. The maximum allowable range of dimensional deviation is within ±3mm, and it is judged to be a qualified product. Visual inspection: no obvious dents, cracks, etc. were found, and

What are the differences between inert ceramic balls and activated alumina balls

Inert alumina ball is abbreviated as inert porcelain ball. It is processed from high-quality chemical porcelain clay materials and has the characteristics of high strength, high chemical stability and thermal stability. So what are the differences between inert ceramic balls and activated alumina balls? Let’s briefly understand: Inert ceramic balls

 Alumina grinding columns are widely used in different types of ceramics, enamels, glass, chemicals, etc. 

Popular Article List

Scroll to Top