24/7 Customer Support
Reply within 12 hours
Online store always open
High alumina ceramic ball is white, spots will be particularly obvious and easy to find. According to the number and size of spots, it is roughly divided into the following three situations.
Kaolin is a silicate mineral. Due to its water-containing silicate chemical composition and layered structure characteristics, it has special properties that many half of the minerals do not possess. Kaolin is mainly used in papermaking, ceramics and refractory materials, followed by coatings, rubber fillers, enamel glazes and white cement raw materials, and a small amount
Alumina ceramic grinding balls are made of high-purity alumina powder rolled by a ball forming machine or isostatically pressed and then sintered at high temperature. The density of 92 alumina balls is about 3.6, the Mohs hardness is 9, and the water absorption is about 0.01. %, the self-wear amount is 0.01. Because of the
The performance requirements of high alumina ceramic balls used as grinding media are mainly bulk density, wear resistance and compressive strength. Wear resistance is an important indicator to measure the quality of ceramic balls. This performance not only depends on the production process parameters, but also on the production formula of high alumina ceramic balls.
Alumina ceramic balls are currently commonly used high-tech ceramic products. They have attracted attention for their excellent wear resistance, corrosion resistance, high mechanical strength, and high grinding efficiency. Alumina ceramic balls are mainly used in the preparation of blank glaze in the ceramic industry and the production of fine powder in the electronics, chemical, metallurgical,
In wet grinding, the nano powder is mixed with a suitable solvent to prepare a suitable material. In order to avoid the phenomenon of powder agglomeration during the grinding process, it is necessary to add appropriate dispersants or auxiliary agents as grinding aids. If you want the final nano-scale product to be a powder instead
People in the grinding industry may know that the application of alumina balls has the problem of spheroid breakage. This problem has become an obstacle in the popularization of alumina ceramic balls. How can we solve this problem? First of all, in the damage rate of alumina balls, in order to improve the material properties
Alumina ceramic ball production process 1. Preparation of blanks The main components of Dehua’s ceramic blanks are quartz, feldspar and kaolin. According to the molding method of its products, it can be divided into moldable blanks and grouting blanks. 2. Moulding, 3. Forming. Forming is to use a dry plaster mold to make the prepared
Alumina balls are also called high-alumina balls, filled ball lights. High-alumina balls are widely used in different types of ceramics, enamels, glass, and chemicals due to their excellent characteristics such as high strength, high hardness, high wear resistance, high specific gravity, small size, high temperature resistance, corrosion resistance, and non-polluting. And so on the thick
Alumina ball detection method Diameter size detection and measurement: use a vernier caliper to measure the average value from different angles. The maximum allowable range of dimensional deviation is within ±3mm, and it is judged to be a qualified product. Visual inspection: no obvious dents, cracks, etc. were found, and all were qualified. Water absorption
At present, ceramic balls and alumina balls are mainly used for grinding in the market because of its low price. At least use zirconium balls, steel balls, and alumina grinding balls. This should be considered based on the properties of the materials, electricity costs, and grinding efficiency. Zirconium ball density 6.0g/cm³ The density of steel