+86-17895376160

24/7 Customer Support

bruce@aluminaceramicball.com

Reply within 12hours

Mon - Fri: 9:00 - 17:30

Online store always open

Ceramic ball production process introduction

Alumina ceramic ball production process

1. Preparation of blanks The main components of Dehua’s ceramic blanks are quartz, feldspar and kaolin. According to the molding method of its products, it can be divided into moldable blanks and grouting blanks.

2. Moulding,

3. Forming. Forming is to use a dry plaster mold to make the prepared blanks into the required blanks by various methods. At present, the commonly used forming methods in Dehua production areas include plastic forming and injection molding. There are four methods of slurry forming, dry pressing forming and isostatic pressing forming.

Uses of alumina ceramic balls

Porcelain balls are divided into two types: inert alumina ceramic balls and alumina grinding balls. inert ceramic balls are widely used in petroleum, chemical, fertilizer, natural gas and environmental protection industries as the covering support material for the catalyst in the reactor and tower packing. It has the characteristics of high temperature and pressure resistance, low water absorption, and stable chemical properties. It can withstand the corrosion of acids, alkalis and other organic solvents, and can withstand temperature changes during the production process. There are many kinds of porcelain balls, and they have different functions.

What are the functions of ceramic balls

As a support and covering material for the catalyst in the reactor, it can buffer the impact of the liquid and gas entering the reactor on the catalyst, protect the catalyst, and improve the distribution of liquid and gas in the reactor

You May Also Enjoy these Article for alumina product

what is the usage of Inert Ceramic Balls Catalyst Bed Support balls

1. Ceramic balls (alumina ceramic ball) Alumina ceramic ball used for covering, supporting, filtering and catalyst carrier in various packed towers; regenerative fillers for air separation units; high wear-resistant grinding media. Ceramic balls include: inert ceramic balls, perforated ceramic balls, microporous ceramic balls, active ceramic balls, thermal storage ceramic balls, and grinding ceramic balls. 2.

Read More »

Common Defects and Cause Analysis of High Alumina Ceramic Ball

The common quality defects of high alumina ceramic balls are divided into: (a) appearance quality defects such as spots, blistering, adhesion and wind crystal; (b) performance defects, including waist cracks, raw burning, large wear and nail lines. Through the inspection of high alumina ceramic balls at home and abroad, it is found that nail pattern

Read More »

The difference between activated alumina ball and high alumina ball

The difference between activated alumina ball and high alumina ball Activated alumina ball has an internal porous structure and strong water absorption capacity. High alumina ball is also called alumina ceramic ball, alumina grinding ball, ceramic ball, etc. It is an inert ball with no voids inside and has good wear resistance, corrosion resistance, and

Read More »

 Alumina grinding columns are widely used in different types of ceramics, enamels, glass, chemicals, etc. 

Popular Article List

June 2024
M T W T F S S
 12
3456789
10111213141516
17181920212223
24252627282930
Scroll to Top