24/7 Customer Support


Reply within 12hours

Mon - Fri: 9:00 - 17:30

Online store always open

How to solve the problem of alumina ball crushing

People in the grinding industry may know that the application of alumina balls has the problem of spheroid breakage. This problem has become an obstacle in the popularization of alumina ceramic balls. How can we solve this problem?

First of all, in the damage rate of alumina balls, in order to improve the material properties of ceramic balls, the damage rate of balls and balls is improved, and at the same time, the wear resistance and impact resistance of the alumina ball grinding process are reduced. Sliding impact and conflict can improve performance.

In addition, two methods of aluminum ball press forming and roll press forming are also controlled. By enhancing the compactness and impact resistance of the alumina crimp ball as much as possible, the damage rate can be effectively reduced.

Finally, the grinding is carried out according to the standard process of alumina ball, adding materials first, and then adding alumina ball to reduce the impact force and protect the alumina ball.

You May Also Enjoy these Article for alumina product

What is the specific gravity of the high aluminum ball

Abstract: High alumina ball is a good neutral material, we can use it as a wear-resistant abrasive material for correct use. High alumina balls can be subdivided into 90, 92, 95, 99 series according to alumina content. The common grinding media on the market are pebbles, alumina balls, steel balls, glass balls, zirconia balls, silicon

Read More »

What is aluminum balls?

Alumina balls refer to bauxite, roller powder, alumina, high-temperature calcined α alumina powder as raw materials, which are produced during the process of mixing, crushing, grinding (slurry, clay), molding, drying, and sintering, mainly Grinding media, while the ball stone is widely used. According to the different alumina content, it can be divided into medium aluminum

Read More »

Abrasion test method of alumina ceramic grinding ball

Abrasion test method of alumina ceramic ball:  use 7L Polyurethane standard grinding tank,  containing 4kg alumina ceramic balls, 4kg water, 80r/min, After 24h, the dry weight M (g) before grinding and the dry weight N (g ) after grinding are self-wear: In the actual application process, there are other intermediate media. In some cases, it is dry grinding, so the abrasion in actual application is higher than this standard.  Standard

Read More »

 Alumina grinding columns are widely used in different types of ceramics, enamels, glass, chemicals, etc. 

Popular Article List

July 2024
Scroll to Top